Anterior Siguiente


A2-A6 PEK Process Controller

A2-A6 PEK Process Controller

For use with ESAB CAN-controlled power sources and motors.

Agregar a la Lista de Compras


  • One standard controller for all of ESAB's SAW equipment whether DC, AC, or AC/DC power source, tractors and Column and Boom. The standard controller reduces the need for operator training.
  • Reduces risk of operator-caused weld defects, and ensures compliance to WPS by limiting operator access to only the required parameters. The PEK indicates if welding parameters are outside the set limits.
  • Easy to change from one job to the next with 255 programmable parameter memories that allow individual settings for all stations to be stored in each unit.
  • Easy to replicate parameters from one welding station to the other or from computer to the controller using a USB memory drive. No need for a laptop and Ethernet connection at the welding station.
  • Back up weld and quality data stores all relevant data for monitoring purposes.
  • Native language support for 19 native languages includning English, Chinese, French, German, Korean, etc.
  • Built in step controller for step/spiral cladding applications


Power Requirements and Connections

Connection Power max 900 VA
Connection Type to Power Source Burndy contact 12-poles
Connection Voltage from Power Source 42V AC, 50/60 Hz
Enclosure Class IP23
Inputs for connection of sensors or limit switches
Motor Connection Adjustment, A2 and A6 connection of 2 motors, current 6A cont, max 10A
Standards EN60974-1, EN60974-10
Valve Output 1pc, 42 V AC, 0.5A

Speeds and Temperatures

Max Ambient Temp 113 °F (45 °C)
Max Manual Travel Speed 2.0 m/min (79 in./min)
Min Ambient Temp -15 °C (59 °F)
Relative Humidity 98 %
Welding Speed 0.1-2.0 m/min (4-79 in./min)
Wire Feed Speed 0.3-25 m/min (12-984 in./min)

Weights and Dimensions

Height 11 in. (273 mm)
Length 7 in. (246 mm)
Weight 14.5 lb (6.6 kg)
Width 9.25 in. (235 mm)