Exaton Ni59


Exaton Ni59

The following items have been added to your list


Exaton Ni59 is a nickel-chrome-molybdenum alloy of type alloy 59. It is a versatile alloy with excellent wet corrosion resistance for the most demanding applications. It combines excellent corrosion resistance in oxidizing and reducing media, has excellent resistance in chloride containing media and to localized corrosion environments. Exaton Ni59 has excellent thermal stability compared to other common nickel alloys and has therefore outstanding resistance to intermetallic precipitation during welding. Applications for Exaton Ni59 are found in aggressive and contaminated corrosive media including scrubbers for flue gas desulfurisation (FGD), chemical process plants and in severe offshore and petrochemical environments.

Exaton Ni59 is used for joining matching alloys or dissimilar joining to other nickel alloys such as UNS N10276 (2.4819), type UNS N06022 (2.4602), UNS N06625 (2.4856) and N08825 (2.4858). It provides strong, tough, Nbfree weld metal for dissimilar welds in super-austenitic and super-duplex stainless steel joints or combinations of these with nickel alloys. Exaton Ni59 can be used for surfacing.

Applications for Exaton Ni59 are found in contaminated mineral acid environments such as sulfuric acid, hydrochloric acid, phosphoric acid, nitric acid etc. Components in sulfuric acid coolers, digesters and bleachers. Chemical, petrochemical, marine, pharmaceutical, energy production and pollution control.

Exaton Ni59 is approved in ISO15156/MR0175 (highest test level VII in sour-gas environments).

Exaton Ni59 is used to weld most of the nickel alloys such as alloy 59, C-22, C-276 etc. It can also be used for joining nickel alloys with duplex stainless steels, super duplex stainless steels and hyper duplex stainless steels. It is used for MIG/MAG welding.

Exaton Ni59


Propiedades de Ensayo de impacto Charpy

Valor de impacto Temperatura de ensayo
as welded
130 J (96 ft-lb) -196 degC (-321 degF)
170 J (126 ft-lb) 20 degC (68 degF)

Propiedades tensoras típicas

AlargamientoCondiciónLímite de elasticidadResistencia a la tracción
45 %As Welded470 MPa (68 ksi)750 MPa (109 ksi)

Parámetros de soldadura

Current Voltage Diámetro del hilo Wire Feed Speed
150-260 A 24-29 V 1.2 mm (0.047 in.) 3.0-10.0 m/min (118-394 in./min)
230-350 A 25-30 V 1.6 mm (1/16 in.) 3.0-5.0 m/min (118-197 in./min)


Wire Electrode SFA/AWS A5.14 : ERNiCrMo-13
EN ISO 18274 : S Ni 6059 (NiCr23Mo16)
Werkstoffnummer : 2.4605


Aprobaciones CE EN 13479
MV : VdTÜV 09183
Las aprobaciones dependen de la ubicación de la fábrica. Póngase en contacto con ESAB para obtener más información.

Análisis del Metal de Soldadura

à% Composición hilo (valores típicos)
Al C Co Cr Fe Mn Mo Ni P S Si
0.3 % <=0.01 % <=0.3 % 23 % <=0.5 % <=0.5 % 15.5 % 59 % <=0.015 % <=0.01 % <=0.1 %

How to purchase Exaton Ni59

We're as eager to put ESAB gear in your hands as you are to have it.  That's why we sell our products with distributors who'll give you the attention, support, and value you deserve.  Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.

To make things even easier, we've developed the online shopping list below.  As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet.  And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.

To find an ESAB distributor, just use the distributor locator tool featured on every page of our site.  Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.

Part Numbers and Accessories

Part Numbers : Exaton Ni59