22.15.3.L is an austenitic filler material for joining stainless steels to carbon steels or low-alloy steels and for overlay welding. It is used for MIG/MAG welding.
Propiedades de Ensayo de impacto Charpy
|Valor de impacto||Temperatura de ensayo|
|20 J (15 ft-lb)||-196 degC (-321 degF)|
|95 J (70 ft-lb)||20 degC (68 degF)|
Propiedades tensoras típicas
|Alargamiento||Condición||Gas de protección||Límite de elasticidad||Resistencia a la tracción|
|31 %||As Welded||ISO||450 MPa (65 ksi)||610 MPa (88 ksi)|
Parámetros de soldadura
|Current||Voltage||Diámetro del hilo||Wire Feed Speed|
|40-120 A||15-19 V||0.8 mm (0.030 in.)||4.0-8.0 m/min (157-315 in./min)|
|150-260 A||24-29 V||1.2 mm (0.047 in.)||3.0-10.0 m/min (118-394 in./min)|
|230-350 A||25-30 V||1.6 mm (1/16 in.)||3.0-5.0 m/min (118-197 in./min)|
EN ISO 14343-A : G 23 12 2 L
SFA/AWS A5.9 : ER(309LMo)
EN 10088-1 : ~1.4435
How to purchase Exaton 22.15.3.L
We're as eager to put ESAB gear in your hands as you are to have it. That's why we sell our products with distributors who'll give you the attention, support, and value you deserve. Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.
To make things even easier, we've developed the online shopping list below. As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet. And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.
To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.